Advanced, yet still at a favourable price, equipped with up to 9 electrochemical and NDIR sensors.
Has a built-in pressure sensor, large internal memory for results and built-in ribbon printer for standard (non-thermal) paper.
Optional condensation "miniDryer" completes the offer for our best-selling portable device.
Brochure
Brochure
Features
- Produced in two kinds of casing: soft and hard
- Equipped with up to 7 electrochemical cells
- Equipped with up to 2 NDIR sensors
- Built-in 58mm ribbon graphic printer
- Built-in rechargeable battery for up to 8 hours of operating
- Peltier "miniDryer" with a peristaltic pump for condensate removal (optional)
- Probe holder with a standard M30x1 fitting, fits all madur gas probes with the K-type thermocouples
- Gas filter with condensate trap and replaceable insert
- Differential pressure sensor - for measurements of chimney draft and flow velocity (with help of Pitot tube)
- Soot measurement program
- Measurements of gas and ambient temperatures
- 2 additional inputs for extra temperature sensors
- Analogue outputs (0/4-20mA) - optional
- Built-in large memory for results, two formats of data savings
- Calculations of many additional parameters
- Firmware for gas calibrations
Two versions of analyser are available:
- Version in "soft" casing
- Version in "hard" casing
Tech specs
General Parematers - Version A (in soft casing)
| Dimensions (W x H x D) | 243 x 130 x 60mm 257 x 130 x 60mm (with gas connectors) |
| Weight | 6.2 ÷ 7.2kg |
| Casing material | Textile (polyester) |
| Operating conditions | T: 10°C ÷ 50°C, RH: 5% ÷ 90% (non-condensing) |
| Storing temperature | 0°C ÷ +55°C |
| Power supply: input | max power consumption | 90 ÷ 240VAC | 70W |
| Battery: type | work time | charging time | Lead-acid, rechargeable 12V / 2.2Ah | 7h | 14h |
| Data memory: size | number of results | 32kB | 30 reports + 10 banks (1024 sets of data) |
| Display | Graphical LCD 128x128, with variable contrast and backlighting |
| Printer | High-speed dot matrix, graphic printer for 57mm normal paper |
| Analogue outputs | Two current (0/4mA ÷ 20mA) |
| Gas pump | gas flow | Diaphragm, max 2l/min (with automatic flow control) | 90l/h (1.5l/min) |
| Purging pump for CO sensor (optional) | Diaphragm, max 1.5l/min |
| Communication interface with PC computer | RS-232C |
| Gas filtering |
|
General Parematers - Version B (in hard casing)
| Dimensions (W x H x D) | 455 x 270 x 220mm |
| Weight (without accessories) | 8.2 ÷ 9.2kg |
| Casing material | Wood & aluminium |
| Operating conditions | T: 10°C ÷ 50°C, RH: 5% ÷ 90% (non-condensing) |
| Storing temperature | 0°C ÷ +55°C |
| Power supply: input | max power consumption | 90 ÷ 240VAC | 70W |
| Battery: type | work time | charging time | Lead-acid, rechargeable 12V / 2.2Ah | 7h | 14h |
| Data memory: size | number of results | 32kB | 30 reports + 10 banks (1024 sets of data) |
| Display | Graphical LCD 128x128, with variable contrast and backlighting |
| Printer | High-speed dot matrix, graphic printer for 57mm normal paper |
| Analogue outputs | Two current (0/4mA ÷ 20mA) |
| Gas pump | gas flow | Diaphragm, max 2l/min (with automatic flow control) | 90l/h (1.5l/min) |
| Purging pump for CO sensor (optional) | Diaphragm, max 1.5l/min |
| Communication interface with PC computer | RS-232C |
| Gas filtering |
|
Minidryer (optional)
| Dimensions (W x H x D) | 24 x 120 x 124mm |
| Weight | 800g |
| Operating conditions | T: 10°C ÷ 50°C, RH: 5% ÷ 90% (non-condensing) |
| Storing temperature | -20°C ÷ +55°C |
| Power supply: input | max power consumption | 15V DC (from analyzer's “Probe” socket) | 10W |
| Drying method | Water condensation by rapid cooling down |
| Cooler type | Based on Peltier element |
| Cooling temperature | Down to +4°C electronically stabilised / Dew point of outlet gas at least 8°C below the ambient air temperature |
| Maximum gas flow for efficient drying | 90l/h |
| Condensate pump | Peristaltic, 38 ml/min. |
Measurements of gas components
The analyser can be equipped with sensors from below list
| O2 – (EC, PP) | 20.95%, 25%, 100% |
| CO – (EC) | 20 000ppm, 10% |
| CO – (EC, H2 comp) | 2000ppm |
| CO – (NDIR) | 10%, 50%, 100% |
| CO2 – (NDIR) | 25%, 50%, 100% |
| CxHy – (NDIR) | 5%, 25%, 100% |
| NO – (EC) | 5000ppm |
| NO2 – (EC) | 1000ppm |
| SO2 – (EC) | 5000ppm |
| H2S – (EC) | 1000ppm |
| H2 – (EC) | 2000ppm, 20 000ppm |
| NH3 – (EC) | 1000ppm |
| CL2 – (EC) | 250ppm |
| HCl – (EC) | 50ppm |
| CL2 - (EC) | 250ppm |
| HCl - (EC) | 50ppm |
EC - Electrochemical sensor
PP – partial pressure
NDIR – non dispersive Infrared sensor
PP – partial pressure
NDIR – non dispersive Infrared sensor
Other measurements / calculated results
| Method | Range | |
|---|---|---|
| Tgas – gas temperature | K-type thermocouple | -10 ÷ 1000°C | 0.1°C |
| S-type thermocouple | -10 ÷ 1500°C | 0.1°C | |
| Tamb – gas temperature | PT500 resistive sensor | -10 ÷ 100°C | 0.1°C |
| PT500 resistive sensor | ||
| T1 – external temperature | K-type thermocouple | -10 ÷ 1000°C | 0.1°C |
| S-type thermocouple | -10 ÷ 1500°C | 0.1°C | |
| T2 – external temperature | PT500 resistive sensor | -10 ÷ 100°C | 0.1°C |
| K-type thermocouple | 10 ÷ 100°C | 0.1°C | |
| T3 – external temperature | K-type thermocouple | -10 ÷ 1000°C | 0.1°C |
| S-type thermocouple | -10 ÷ 1500°C | 0.1°C | |
| T4 – external temperature | PT500 resistive sensor | -10 ÷ 100°C | 0.1°C |
| Differential pressure | Silicon piezoresistive pressure sensor | -25hPa ÷ +25hPa | 10Pa (0.01hPa) |
| Gas flow velocity | Indirect, with Pitot tube & pressure sensor | 1 ÷ 50m/s | 0.1m/s |
| Lambda λ – excess air number | Calculated | 1 ÷ 10 | 0.01 |
| qA – stack loss | Calculated | 0 ÷ 100% | 0.1% |
| Eta η – combustion efficiency | Calculated | 0 ÷ 120% | 0.1% |
| U1÷U2 – external analogue input (voltage) | Delta-sigma ADC | -20V ÷ +20V | 0.01V |
| I1÷I2 – external analogue input (current) | Delta-sigma ADC | -20mA ÷ +20mA | 0.01mA |
Drawings
Drawing #1
Sensonic 4000 filter can be fitted with inserts of different diameters: Insert of 15mm inside diameter is fitted with help of filter insert guide. For 12mm insert, the guide must be removed, and insert is installed directly in the filters's head.
Drawing #2
Gas fitting - quick coupler, male part (615A0203A)
Drawing #3
Gas fitting - quick coupler, male part (615A0203A)
Drawing #4
“Probe” connector, Binder 680 series, 7-pin female (512O0710C)
Drawing #5
“Temp1” & “Temp2” connectors, Binder 712 series, 3-pin female (512M0310C)
Drawing #6
“RS-232C” connector, Binder 712 series, 4-pin female (512M0410C)
Drawing #7
“U/I1” & “U/I2” connectors, Binder 712 series, 5-pin female (512M0510C)
Drawing #8
Dimensions of the A version of analyzers - in “soft” casing
Drawing #9
Dimensions of the B version of analyzers - in “hard” casing
Drawing #10
View at the analyser's front panel (keyboard and display)
Equipment
Analyser's standard equipment supplied along with the device
- 3m mains cable (type of plug to be selected)
- Comparison scale with paper filters for the soot test
- Single gas filter with condensation trap and filter inlet (pore size 5µm)
- 2.5m RS-232C communication cable with DB9 female connector
- Software CD with programs and manuals
- Quick coupler for the probe holder (1pc.)
Supplemental equipment - ordered separately, but essential to work with the analyser
Probe holder
Gas probe pipe
Optional equipment
Ambient temperature sensor
Pitot tube
RS-232C to USB converter
Bluetooth communication module
