MD3 gas dryer, besides it is supplied as a part of Sensonic CGM gas analyser, can work as an autonomous device Then it is available in two versions:
Dimensions (W x H x D) | Without filters: 110 x 205 x 160mm With Filters: 145 x 240 x 160mm |
Weight | 1790 g (single filter version) |
Mounting plate: dimensions (H x W) | material | weight | 450 x 439mm | aluminium | 1.55kg |
Drying method | Water condensation by rapid cooling down |
Cooler type | Based on Peltier cooling element with fan (12VDC supply) |
Cooling temperature | Constant, about +1°C, output gas dewpoint about +4°C |
Ready to operate after | 5 minutes |
Operating conditions | T: 0°C ÷ 50°C, RH: 5% ÷ 90% (non-condensing) |
Storing temperature | 0°C ÷ 60°C |
Maximum gas flow for efficient drying (at inlet gas temp. 100°C and RH 100%) | 100l/h |
Gas filters: quantity | material | 1 (optionally 2) | PA – body, PC – cover, viton – sealing |
Filter insert: length | ID | OD | material | pore size | 42mm | 26mm | 32mm | glass fibre | 2 μm |
Condensate removal | With built-in peristaltic pump |
Peristaltic pump capacity | 38ml/min |
Power consumption | 30W |
Dimensions (W x H x D) | 360 x 130 x 56mm |
Weight (depends on equipment) | 1.4kg |
Casing's material | Aluminium |
Mounting plate | Power supply is mounted on common plate with analyser unit |
Operating conditions | T: +10°C ÷ +50°C, RH: 5% ÷ 90% (non-condensing) |
Storing temperature | 0°C ÷ +55°C |
Input voltage | 100 ÷ 240V AC 50/60Hz |
Output voltage | 24V DC / 6.3A | 150W |
Output current | 6.3A max |
Mains fuse | 6A, B type |
Cable pass | 2 pcs PG-7 |
Dimensions (W x H x D) | 115 x 55 x 35mm |
Weight | ~300g |
Casing's material | PC or PPO |
Operating conditions | 0°C ÷ +40°C |
Storing temperature | 0°C ÷ +55°C |
Input voltage | 100 ÷ 240V AC 50/60Hz |
Output voltage | +15V DC |
Output current | 4.33A max |
Output plug type | 5.5 x 2.1 x 11mm (positive inner pin) |
Output cable length | 1.8m |
Mains cable socket | IEC C8 (T2) |